The significant impact of temperature on the machining accuracy of CNC lathes
During the operation of a CNC lathe, temperature is an important operating data. This is mainly because the operation of various components of the lathe generates a certain amount of heat. If this heat is not discharged in time, it will lead to an increase in temperature, which will affect the operation of the entire lathe and cause inaccurate machining accuracy. Today, our CNC lathe manufacturer will explain the important impact of temperature on the machining accuracy of CNC lathes.
On the one hand, common forms of malfunctions such as abnormal damage to mechanical components and blockage of pipelines can cause an increase in temperature in the corresponding areas. Therefore, overflow is a characteristic parameter that characterizes mechanical faults. On the other hand, the performance of mechanical parts is closely related to temperature. If the temperature is too high, it will reduce the performance of the parts and even cause them to burn out. Therefore, temperature is also an important factor causing failures in precision CNC lathes.
It should be noted that precision CNC lathes, as highly automated and intelligent machines, should be kept away from working environments with large vibrations and from machinery and equipment that can affect them. If necessary, vibration prevention measures should be taken in the workplace to create a good working environment for the use of precision CNC lathes. To stay away from equipment with high vibration (such as punching machines, forging equipment, etc.), high-precision machine tools should also adopt anti vibration measures (such as anti vibration grooves, etc.), otherwise it will directly affect the machining accuracy and stability of the machine tool, and also cause poor contact and failure of electronic components, affecting the reliability of precision CNC lathes.
The ambient temperature of precision CNC lathe should be below 30 degrees Celsius, and the relative temperature should be less than 80%. Generally speaking, there are exhaust fans or air coolers inside the CNC control box to maintain a constant operating temperature or minimal temperature difference of electronic components, especially the central processing unit. Excessive temperature and humidity will result in the lifespan of control system components Reduced lifespan and increased malfunctions. The increase in temperature and humidity, as well as the increase in dust, can cause adhesion on the integrated circuit board and lead to short circuits.
Power requirements:

Precision CNC lathes installed in machining workshops not only have large environmental temperature changes and poor operating conditions, but also have various mechanical and electrical equipment, resulting in large fluctuations in the power grid. Therefore, the installation of CNC lathes requires strict control over the power supply voltage. The fluctuation of power supply voltage must be within the allowable range and remain relatively stable, otherwise it will affect the normal operation of the CNC system.
The above is the important impact of temperature on the machining accuracy of CNC lathes compiled and released by our CNC lathe manufacturer. I hope the above explanation can be helpful for everyone when using CNC lathes in the future.