Detailed work of small CNC lathe works
Machining a part on a small CNC lathe usually takes the following steps:
1) according to the processing of parts of the drawings and process plans, with the prescribed code and program format to write a single program, and record it on the carrier;
2) inputting the program on the program carrier to the CNC unit through the input device;
3) CNC unit will process the input program, the coordinates of the machine to the servo system sends a signal;
4) The servo system drives the moving parts of the machine tool according to the signal from the CNC unit and controls the necessary auxiliary operation.
5) through the machine tool components to drive the relative motion of the tool and the workpiece, the processing of the required parts;
6) to detect the movement of the machine and feedback to the CNC unit through the feedback device to reduce the machining error. Of course, for open-loop CNC machine tools is not detected, the feedback system.
The above content describes the working principle of small CNC lathes, the main products of Tai'an Haiji Machinery: horizontal lathe bed CNC lathes, vertical CNC lathes, CNC turning centers, CNC pipe thread lathes, CNC milling machines, CNC machining centers, select the number of sea , Choose Su always feel right, order phone 13953800780.